Skip to main content
  • Poster presentation
  • Open access
  • Published:

Modelling the risk of infection transmission due to environmental contamination in hospital single and multi-bed rooms

Introduction

Aerial dispersion of bioaerosols and subsequent contamination of surfaces is recognised as a potential transmission route for some HCAI infections. Pathogens have been shown to accrue on health-care workers’ (HCW) hands as they touch surfaces [1] and hence can subsequently be transmitted to other patients. This research considers the question: Are single-bed patient rooms more effective than their multi-bed counterparts at reducing this risk?

Objectives

To link design of current hospital rooms with infection risk from surface contamination and HCW contacts.

Methods

Computational fluid dynamics simulations, validated through bioaerosol experiments were used to accurately predict spatial distributions of bioaerosol deposition in a single and multi-bed hospital rooms. A Markov chain Monte-Carlo model was developed using the deposition patterns in conjunction with clinical observation of HCW surface contact sequences, to predict the contamination levels of bacteria on HCWs’ hands as they perform routine patient care in the two rooms types.

Results

Hand colonisation depends on care type, room layout, the number of surface contacts and in particular on the spatial distribution of pathogens between surfaces, which is influenced by ventilation strategy. Contamination on the HCWs' hands decreases monotonically after patient care in a single room due to hand hygiene. During care within multi-bed rooms colonisation levels increase throughout due to the spatial spread of microorganisms contaminating multiple patient surfaces caused by the ventilation strategy. Positioning infectious patients within an unobstructed path between the inlet and outlet diffuser significantly reduces cross contamination to other patients surfaces.

Conclusion

Results indicate that colonisation levels of HCWs’ hands are likely to be significantly lower after care in single patient rooms than after care in a multi-bed ward and that patient and ventilation design is vitally important in helping curtail the risk of bioaerosol spread.

Disclosure of interest

None declared.

References

  1. Pittet D, Dharan S, Touveneau S, Sauvan V, Perneger TV: Bacterial Contamination of the Hands of Hospital Staff During Routine Patient Care. Arch. Intern. Med. 1999, American Medical Association, 159: 821-10.1001/archinte.159.8.821.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

King, MF., Noakes, C. & Sleigh, A. Modelling the risk of infection transmission due to environmental contamination in hospital single and multi-bed rooms. Antimicrob Resist Infect Control 4 (Suppl 1), P31 (2015). https://doi.org/10.1186/2047-2994-4-S1-P31

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/2047-2994-4-S1-P31

Keywords